What Should We Do If CNC Bending Machine's Precision Appears Problems?
1. If the error is very large, it may be programming error, CNC bending machine slider connection loose, grating rupture and so on;
2. Normally a little error, CNC bending machine can be amended on the system, amended to work stable, then normal;
3. Angle instability, often changes, may be loose connection with the slider, grating rupture, material and other related materials.
1. Check the CNC bending machine to run the program, the mould inspection procedures, material, thickness, work-piece length, bending mode is consistent with the actual operation, the slider connection is loose, grating feet connection is strong;
2. There is a slight error in normal, which can be caused by various reasons, such as the error between the material thickness of the program and the thickness of the actual application;The uniformity of the material, the wear and tear of the mold, operation, etc.;
3. Check the repeated positioning accuracy of Y-axis, check whether the connection of sliding block and grating ruler is normal, and if normal, it is likely to be related to material material.
December 19, 20171. The slide partAdopting hydraulic drive, the slide part is made up of sliding block, oil cylinder and mechanical block. The left and right cylinders are fixed on the rack, and the piston (rod) is dr...view
September 18, 2017CNC bending machine is a sheet metal processing equipment thatcomplete the sheet metal bending.With therapid development of home appliances, electronics, kitchen utensils,instruments, chassis and othe...view
September 26, 2017Components and structure of CNC bending machine:1. Sliding block part: adopt hydraulic transmission, and the sliding block is made up of sliding-block, oil cylinder and mechanical blocking block.The l...view
October 20, 2017Hydraulic bending machine can be used to bend various metal plates. Once the operator is equipped with a variety of different structures, shapes of molds, the metal plates can be pressed and folded in...view
October 20, 20171. The noise of the oil pump is too loud (heating too fast) and the oil pump is damaged 1). The oil pump is absorbed by the oil pump suction pipe or the oil tank is too low2). The oil temperature is t...view
October 20, 2017What is the trend of the application domain of bending machine? The following is a brief introduction to the trend of mould application in bending machine, many users now tend to use CNC bending machi...view