WC67K CNC Hydraulic Sheet Metal Press Brake
- CNC Controller: DELEM DA41S, Holland
- European standard Punch & Dies
- Main motor: Siemens Germany
- Oil pump: Sunny, America
- Hydraulic Valve: Bosch Rexroth, Germany
- Foot Pedal: Kacon, Korea
- Electric: Schneider, France
- Ball screw & linear guide
- Photoelectric Proximity Switch
- Mechanical quick clamps
- Servo motors
CNC Controller: DELEM DA41S, Holland
Using servo control and servo drive. Angle programming and setting die parameters.
European standard Punch & Dies
Made by 42CrMo steel.The equipped standard Dies, special non-standardmold is available under client's requirement accordingto real workpiece situation.' type="text">' type="text">
WC67K CNC hydraulic sheet metal press brake with DA41s system
- The machine compliance with eu standards.The frame of the machine eliminates internal stress by annealing and ensures high precision and strength.All products are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology.
- The WC67K series torsion axis bending machine uses Holland Delem CNC control system to help you increase your productivity and keep the lowest cost and lower maintenance costs.
- The latest high frequency response hydraulic control technology, high speed, high efficiency and high precision.
- High quality and repetitive bending is obtained by using synchronized cylinders and valves.
- Newst servo response hydraulic control technology, makes the machine tool is more stable and reliable.
- X and Y-axes realize accurate positioning function through Estun E200p/ DELEM DA41S controller programming and 2 servo motors.
- Dutch Delem DA41S CNC controller.
- Servo drive and control positioning of 2axes(X, Y).
- Linear guide rail and ball screw accuracy of 0.01mm(HIWIN,TAIWAN).
- Steel mono-block construction.
- Adjustable stop fingers.
- Standard electrics from Schneider,France.
- Standard oil tube connectors from EMB Germany.
- Standard valves and oil pump from Bosch Rexroth Germany.
- Standard main motro from Siemens Germany
- Hydraulic and electrical overload protection
- Light guards ensure the safety of operators during operation
|Serial No.||Part Description||Brief instruction||Country of origin|
|1-||Estun NC System||Delem DA41S||Holland|
|2-||Electrical components||Schneider Electrical||French|
|4-||Back Gauge & RAM Drive||Inverter from Delta||Taiwan,China|
|5-||Ball screw/ Liner guide||HIWIN||Taiwan,China|
|7-||Travel switch||Schneider Electrical||French|
|12-||Die||One set standard tools from GLDMA||China|
|13||Front/Back Safety Guard||GLDMA||China|
|1-||Safety light curtain||KELI||China|
|2-||Laser Safety Protection||FIESSLER||Germany|
|3-||Manual Crowning system||GLDMA||CHINA|
|4-||E200P / DA41s||Estun/Delem||CHINA/Dutch|
|1-||Warning of high oil temperature||■Yes □No|
|2-||High oil pressure protection||■Yes □No|
|3-||Motor overload protection||■Yes □No|
|5-||Left & Right side protection||■Yes □No||Fixed type(metal)|
|6-||Electricity leakage protection||■Yes □No|
|9-||Safety standards||■CE □CSA ■NR-12 □OSHA|
Liner guide way on back gauge
Adopting HIWIN ball screw and linear guide rail, accuracy 0.05mm.
The stroke can be lengthened if there is further demands on bending size.
Double servo motor & servo drive
X ,Y-axis adopt accurate positioning function through E200p/ DA41S controller programming and servo motor.
Higher servo response hydraulic control technology, the machine performance is more stable and reliable.
Delem DA41S/ Estun E200p controller
These two controllers both support servo drive.
The DA-41s also support Angle Programming and Die Parameters Setting functions.
Leave a message
We will contact you within 24 hours.