Home > Shearing machine > QC11K-CNC hydraulic guillotine shearing machine-DELEM DAC360 system

Technical Features

  1. DELEM DAC360 CNC Controller
  2. Shear blade:
  3. Electrics: Schneider, France
  4. Foot pedal: KACON South Korea
  5. Main motor: Siemens Germany
  6. Oil Pump
  7. hydraulic valve
  8. Casing tube: EMB, Germany
  9. Ball screw&linear guide: Hiwin, Taiwan
qc11k-cnc-hydraulic-guillotine-shearing-machine-delem-dac360-system
1

DELEM DAC360 CNC Controller

Controller can adjust automatically after Input thickness.calculate descending stroke Input shearing length. Adjust automatically to input the material code and thickness code.Four materials: Thickness of steel plate, copper plate, stainless plate and aluminum plate can be calculated automatically from 0.1 to 99.9mm.

2

Shear blade:

European standard, made by 6CrW2Si and can be customized.

3

Electrics: Schneider, France

Frequency converter:DELTA, TaiwanAdvanced electrical components and scientific lines can effectively prevent the swing of the xaxis from positioning.

4

Foot pedal: KACON South Korea

The structure of science greatly reduces the probability of error operation and improves the convenience and safety of operation.

5

Main motor: Siemens Germany

The high quality main motor improves the performance and stability of the whole equipment.

6

Oil Pump

SUNNY, America. stably and low noise, optional: Rexroth Bosh

7

hydraulic valve

Rexroth BOSCH, Germany. The advanced hydraulic system improves the efficiency and safety of the whole machine.

8

Casing tube: EMB, Germany

The German EMB sleeve and connector effectively reduce the increase in weld slag and facilitate the flow of oil. It makes the machine run more stable.

9

Ball screw&linear guide: Hiwin, Taiwan

High-performance ball screw and polished rad structure, guarantee the positioning accuracy, unique timing transmission mechanism, reliable an stable.

QC11K-CNC hydraulic guillotine shearing machine-DELEM DAC360 system

  1. The design of the machine conform to EU international standards. The fuselage eliminates internal stress by annealing and vibration, ensuring higher precision and strength.We use SOLID WORKS 3D programming to design all porducts and made with enhanced ST44-1 quality steel with the latest technology.
  2. Cutter holder use three-point support rolling guide rail, reducing the friction to the greatest extent, and realizing seamless rolling during cutter holder moving.
  3. Backgauge is adjusted by HIWIN high-precision ball screw and linear guide driven by DELEM DAC360 CNC controller.
  4. frequency convertor prevents positioning device horizontal swinging, effectivelyimproving positioning accuracy  during the working process
  5. Can read oil level directly
  6. detecting the shearing angle by gratingruler
  7. Front safeguard rail adopts opening door cut off power,ensuring operational safe.
  8. Rapid adjustment mechanism for rearranging blade clearance, rolling ball worktable to reduce friction and prevent work piece from scratching.simple operation by hand and adjusting steplessly.



  1. DELEM DAC360 CNC controller system.
  2. Linear guide rail and ball screw accuracy of 0.01mm(HIWIN,TAIWAN).
  3. Servo motor driving the controller
  4. Backgauge X-axis servo control
  5. Steel mono-block construction.
  6. DELTA frequency converter
  7. Standard electrics from Schneider,France.
  8. Standard oil tube connectors from EMB Germany.
  9. Standard valves and oil pump from Bosch Rexroth Germany.
  10. Standard main motro from Siemens Germany
  11. Hydraulic and electrical overload protection
  12. Light guards ensure the safety of operators during operation(optional)
ModelCutting ThicknessCutting LengthAngel RangeBackgauge StrokeApprox WeightOverall LengthOverall WidthOverall HeightMain Power
mmmm(°)mmTmmmmmmKW
6×2500625001-37504.23140174020407.5
6×3200632001-37505.73750177031507.5
6×4000640001-37508.548301840215011
6×5000650001-37501158301840215011
6×6000660001-37501464802100230011
8×2500825001-37504.430401700170011
8×3200832001-3750638601700170011
8×4000840001-37508.946401700170011
8×5000850001-375011.554002400200011
8×6000860001-37501664802100235011
8×8000880001-375029.585802130235011
10×25001025001-37506.530401800170011
10×32001032001-3750838501830190015
10×40001040001-37501246502100200015
10×50001050001-37501657502100200015
10×60001060001-37502465002100230015
10×80001080001-37503268002100230015
13×25001325001-37508.532851830239015
13×32001332001-37501038551830239018.5
13×40001340001-3100013.548501830239018.5
13×60001360001-310002668501930265018.5
13×80001380001-310004689502130285018.5
13×90001390001-310006599802300295018.5
13×1000013100001-3100085110502500310018.5
16×25001625001-310001334401940283022
16×32001632001-310001540101940283022
16×40001640001-3100016.550101980283022
16×50001650001-3.510002559002600283022
16×60001660001-3.510003169002700283022
16×80001680001-3.510007589002900343022
20×25002025001-3.510001734401980283037
20×32002032001-3.510002040101900283037
20×40002040001-3.510002248502600290037
20×60002060001-3.510005067003000300037
30×25003025001-3.510002934401900283037
30×32003032001-3.510003842001900300037
40×25004025001-3.510003834402000300037
Serial No.Part DescriptionBrief instruction/ OrignalNote
1-CNC Control systemDelem DAC360 CNC SystemHolland
2-Electrical componentsSchneider Electrical from FrenchTravel switch & Limit switch
3-Main MotorSiemens from Germany Brand
4-BackGauge & RAM DriveInverter from Taiwan deltaAccurate positioning control
5-Foot switchKACON from South Korea
6-Hydraulic SystemBosch-Rexroth form Germany
Sealing ElementPARKER from U.S.A Brand
7-Tubing connectorEMB form Germany Brand
8-Ball screw/ Polished rodHIWIN from TaiWan Brand
2. Equipment
1-Pneumatic sheet support system□Yes■No
2-Rear sheet sliding plates■Yes□NoFixed type(metal)
3-Angle Gauge□Yes■No
4-Squaring Arm(800mm)■Yes□No
5-Inverter accurate control■Yes□No
6-Light curtains for finger Protection□Yes■NoReset button
7-Back safety Sensors□Yes■No
8-Back metal fence Safety■Yes□No
9-Safety standards

NR-12

OSHA

Optional CNC controller ---- Delem DAC360s

With function for control backgauge, cutting angle, stroke length and gap
Automatically calculates the required setting for the cutting angle and gap depending on material and thickness
Directly control clamping and cutting in system board

Optional CNC controller ---- Delem DAC360s
Customized front support arm

Customized front support arm

Guarantee cutting precision of large plate
Easy operation, practical and efficient
Can choose optional pneumatic back support device

High standard components & processing skills

Choose famous brand suppliers on each component
Ensure machine running in the most effect
Mature processing technology and skills
The whole structure can reach over ten years of use

Guillotine NC CNC series 3

Leave a message

We will contact you within 24 hours.